CostWiseHome
Skip to content

Furnace Replacement Cost in 2026: Easy Guide to Fair Prices

Furnace Replacement Cost

Furnace replacement cost is a number most homeowners only research after their old system has already failed on a cold night. That is the worst time to shop, because rushed decisions usually cost more. Knowing the typical price range beforehand lets you compare quotes calmly and spot a fair deal.

Furnace Replacement Cost

On average, a new furnace costs $3,800 to $9,500 installed, and many homeowners land near $5,500. Fuel type, size, and efficiency rating make the biggest difference. This guide explains each factor in plain language.

Average Furnace Replacement Cost at a Glance

Furnace TypeTypical Installed Cost
Gas furnace$3,800 – $10,000
Electric furnace$2,000 – $7,000
Oil furnace$6,500 – $10,500
Propane furnace$4,000 – $9,500

These are national estimates. Your price will vary by brand, region, and how complex the installation is.

Furnace Replacement Cost by Fuel Type

Gas furnaces are the most common choice in the U.S. They are efficient and affordable to run, but they need a gas line and proper venting. If your home lacks either, expect extra cost.

Electric furnaces are cheaper to buy and install because they need no venting or gas line. The tradeoff is that electricity often costs more than gas, so monthly bills can run higher in cold climates.

Oil furnaces are common in the Northeast. They cost more to install because of the fuel tank, oil lines, and venting.

Propane furnaces suit homes without natural gas. Remember that propane tank rental or purchase is a separate ongoing expense.

Furnace Replacement Cost by Size

Furnace size is measured in BTUs. A unit that is too small will struggle, and one that is too large wastes money and wears out sooner.

Home SizeTypical OutputUnit Cost (Before Labor)
Up to 1,000 sq. ft.40,000 – 60,000 BTU$1,500 – $3,000
1,000 – 2,000 sq. ft.60,000 – 90,000 BTU$2,000 – $4,000
2,000 – 3,000 sq. ft.90,000 – 120,000 BTU$2,800 – $5,500
3,000+ sq. ft.120,000+ BTU$3,500 – $7,000+

Square footage is only a starting point. Insulation, windows, and climate also matter, so ask your contractor to perform a proper load calculation instead of guessing.

Furnace Replacement Cost by Efficiency Rating

Efficiency is shown as AFUE, which tells you how much fuel becomes usable heat.

  • 80% AFUE: $2,500 – $5,500 for the unit. A budget option that works well in milder climates.
  • 90% to 95% AFUE: $4,500 – $8,000 for the unit. A popular middle ground, and often expected in colder states.
  • 96% to 98% AFUE: $6,000 – $10,000+ for the unit. Best for very cold regions with heavy heating use.

A higher rating costs more upfront but can trim your heating bills by roughly 10% to 30% compared with an old, inefficient unit.

What Affects Furnace Replacement Cost?

Labor

Installation labor usually runs $1,500 to $3,000. Swapping like for like in the same spot is the cheapest scenario.

Ductwork Condition

Leaky or damaged ducts waste heat, no matter how good the new furnace is. Repairs can add $500 to $2,000 or more.

Old Furnace Removal

Hauling away the old unit costs $100 to $500, though many contractors include it in the quote.

Permits

Most areas require a permit, typically $50 to $300. Your contractor normally handles it.

Thermostat Upgrade

A basic thermostat costs $100 to $300 installed. A smart or zoned system can run $150 to $500.

Switching Fuel Types

Changing from oil to gas, for example, is one of the biggest cost jumps. New gas lines, tank removal, or electrical work can add $1,500 to $5,000 or more.

Repair or Replace Your Furnace?

Repair is usually reasonable if your furnace is under 10 years old and the fix costs far less than a new unit. Replacement is smarter when the furnace is 15 to 20 years old, breaks down often, or keeps raising your energy bills.

A handy rule: multiply the repair cost by the furnace’s age. If the result is higher than the price of a new unit, replacing usually makes more financial sense.

Signs It’s Time for a New Furnace

  • Repeated repairs in the past two years
  • Some rooms heat unevenly
  • Energy bills climb without more usage
  • Banging, rattling, or screeching sounds
  • A yellow burner flame instead of blue, which can signal a safety problem
  • The furnace is 15 years old or more

If you see a yellow flame or suspect a carbon monoxide issue, shut the system off and call a professional right away.

Furnace Replacement Cost and Tax Credits

Federal tax credits for efficient furnaces used to soften the price. Under current law, the home energy efficiency credit does not apply to equipment installed after December 31, 2025, so you should not count on a federal credit for a 2026 install. Utility company rebates and manufacturer promotions may still exist in your area, so ask your contractor and your utility what is available. A tax professional can confirm how the rules apply to you.

Should You Replace Your AC at the Same Time?

If your air conditioner is also near the end of its life, doing both jobs together can save on labor and sometimes qualifies for bundle pricing. If the AC still has years left, replacing only the furnace is usually fine. For AC pricing, see our AC replacement cost guide.

How Long Does Installation Take?

A standard swap usually takes 4 to 8 hours and is often finished in one day. Fuel conversions, duct repairs, or tricky access can stretch the job to 1 to 3 days.

Smart Ways to Lower Your Furnace Replacement Cost

  1. Compare at least three quotes. The same equipment can be priced very differently.
  2. Keep the same fuel type. Switching fuels adds a lot of cost.
  3. Pick mid-range efficiency. The most efficient unit does not always pay off in mild climates.
  4. Schedule in spring or fall. Contractors are less busy and often more flexible on price.
  5. Ask about local rebates. Utility programs can reduce your final bill.
  6. Right-size the unit. Bigger is not better, and an oversized furnace cycles inefficiently.
  7. Maintain the new system. Yearly tune-ups help it last longer. Our HVAC maintenance cost guide shows what service typically costs.

Questions to Ask Your HVAC Contractor

  • Are you licensed and insured, with local references?
  • What size and efficiency rating do you recommend for my home?
  • Does the quote include a ductwork inspection?
  • What does the warranty cover for parts and labor?
  • Are there any rebates I qualify for right now?

Final Thoughts

Furnace replacement cost typically ranges from $3,800 to $9,500 installed, depending on fuel type, size, and efficiency. A higher-efficiency model costs more upfront but can lower monthly bills over time. Compare several quotes, ask about local rebates, and choose a contractor with strong reviews so you get a reliable system at a fair price.

For more pricing help, browse our furnace replacement cost guides and other home improvement resources at CostWiseHome.

Leave a Reply

Your email address will not be published. Required fields are marked *